Journal of Manufacturing Processes

Joining of Zr60Ti17Cu12Ni11 bulk metallic glass and aluminum 1060 by underwater explosive welding method

Study on key factors influencing the surface generation in rotary ultrasonic grinding for hard and brittle materials

Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting

Microstructure and surface analysis of friction stir processed Ti-6Al-4V plates manufactured by electron beam melting

Effect of surface texturing on tribological performance of sliding guideway under boundary lubrication

How alumina nanoparticles impact surface characteristics of Al7175 in roller burnishing process

Influence of friction stir processing on microstructure and tensile behavior of AA6061/Al3Zr cast aluminum matrix composites

Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint

Influence of pulse energy density in micro laser weld of crack sensitive Al alloy sheets

Improvement in joint strength and material joinability in clinched joints by electromagnetically assisted clinching

Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs)

Simulation research about rubber pad forming of corner channel with convex or concave mould

Correlating nano-scale surface replication accuracy and cavity temperature in micro-injection moulding using in-line process control and high-speed thermal imaging

An experimental and computational study on the feasibility of bio-dielectrics for sustainable electrical discharge machining

Rapid surface quality assessment of green 3D printed metal-binder parts

Effects of welding pressure on high-power ultrasonic spot welding of Cu/Al dissimilar metals

Experimental investigation of support plates’ influences on tool wear in micro-drilling of CFRP laminates

Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic

Investigations on induced residual stresses, mechanical and metallurgical properties of CO2 laser beam and pulse current gas tungsten arc welded SMO 254

An ultrafast 2-D non-resonant cutting tool for texturing micro-structured surfaces

Three-dimensional thermal-mechanical analysis of retractable pin tool friction stir welding process

A novel hydrodynamic cavitation abrasive technique for internal surface finishing

Monitoring tip-based nanomachining process by time series analysis using support vector machine

Optimization of magnetic oscillation system and microstructural characteristics in arc welding of Al/Mg alloys

Effects of welds distribution and high-low temperature humidity alternating aging on sealing performance of weld-bonded stainless steel structures

Prediction of liquid nitrogen die cooling effect on the extrusion process parameters by means of FE simulations and experimental validation

Investigation of the performance of 248 nm excimer laser assisted photoresist removal process in gaseous media by response surface methodology and artificial neural network

Resistance ceramic-filled annular welding of thin steel sheets

Evaluation of removal characteristics of bonnet polishing tool using polishing forces collected online

Multiphysics study in air-shielding electrochemical micromachining

The influence of combined hydrostatic extrusion and rolling on the microstructure, texture and mechanical properties of Al-Li alloys

Co-extrusion of Zircaloy-2 and Zr-Sn alloy for double clad tube manufacturing: Numerical simulation and experimental validation

Feasibility study on application of hot forming quenching to patchwork blanks using two-stage refilled friction stir spot welding

Mechanical strength enhancement of ultrasonic metal welded Cu/Cu joint by Cu nanoparticles interlayer

Experimental and crystal plasticity evaluation of grain size effect on formability of austenitic stainless steel sheets

Explicit error modeling of dynamic thermal errors of heavy machine tool frames caused by ambient temperature fluctuations

Effect of insert materials on microstructure and mechanical properties of Al/Mg bimetal produced by a novel solid-liquid compound process

Development of novel MIG welding process with duplex current feeding

Research on underwater flux cored arc cutting mechanism based on simulation of kerf formation

Circular trajectory weaving welding control algorithm based on space transformation principle

Extraction of surface curvatures from tool path data and prediction of cutting forces in the finish milling of sculptured surfaces

Numerical and experimental investigation on friction welding of austenite stainless steel and middle carbon steel

Microwave versus conventional porcelain firing: Temperature measurement

Welding of fully –Austenitic stainless steel using pcgtaw process; Part I: Bead structure

Development of an open-sourced automated ultrasonic-assisted soldering system

Numerical studying and experimental investigation: Effect of Reynolds number on performance measures of EDM with high speed flushing

Experimental and numerical investigation on the interference of diamond grains in double-grain grinding silicon carbide ceramics