PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING

Design and development of submerged arc welding fluxes using TiO2-SiO2-CaO and SiO2-CaO-Al2O3 flux system

Entropy generation and heat transport analysis of Casson fluid flow with viscous and Joule heating in an inclined porous microchannel

Experimental and numerical investigation of the transient characteristics and volute casing wall pressure fluctuations of a single-blade pump

Experimental studies on graphite powder-mixed electro-discharge machining of Inconel 718 super alloys: Comparison with conventional electro-discharge machining

Numerical investigation of fluid flow and heat transfer characteristics in novel circular wavy microchannel

Analysis of mixing performances in microchannel with obstacles of different aspect ratios

Multiple slip effects on magnetic-Carreau fluid in a suspension of gyrotactic microorganisms over a slendering sheet

Machinability of AA7075-T6/carbon nanotube surface composite fabricated by friction stir processing

Modeling the growth of a vapor film formed in contact between a hot metal sphere and water in pressure vessels

Modeling of surface roughness in the magnetorheological cylindrical finishing process

Numerical analysis of transient characteristics of a bulb hydraulic turbine during runaway transient process

Multi-criteria optimization of weld bead in pulsed Nd:YAG laser welding of stainless steel 316

Transient Dean flow in a channel with suction/injection: A semi-analytical approach

Charge-based hysteresis compensation in low impedance piezoelectric actuators by a modified Prandtl–Ishlinskii model

An analytical model of burnishing forces using slab method

Effect of variation of cylindrical pin fins height on the overall performance of microchannel heat sink

A modified firefly algorithm to maximize heat dissipation of a rectangular porous fin in heat exchangers exposed to both convective and radiative environment

Thermal and water ageing effect on mechanical, rheological and morphological properties of glass-fibre-reinforced poly(oxymethylene) composite

Crosswise stream of methanol–iron oxide (CH3OH–Fe3O4) with temperature-dependent viscosity and suction/injection effects

Modeling and prediction of metallic powder behavior in explosive compaction process by using genetic programming method based on dimensionless numbers

Analysis of vibration signals to quantify displacement amplitude in the monitoring of vibration-assisted turning

Effect of specimen size and ball size on breakage throughput in the drop-weight test

Dynamic analysis of an open-loop proportional valve controlled hydrostatic drive

Effects of a flow mode transition on natural convection heat transfer in a heat tracing enclosure

A preventive maintenance policy for a pull system with degradation and failures considering product quality

Thermohydraulic optimization of triple concentric-tube heat exchanger: A multi-objective approach

Effect of bed particle size and temperature variation on the minimum fluidisation velocity: A comparison with minimum fluidisation velocity correlations for bubbling fluidised bed designs

Prediction model to estimate the specific energy and product particle size distribution of semi-autogenous mill

Research on multi-objective optimization of switched flux motor based on improved NSGA-II algorithm

Study of the pressure drop in dust scrubber affected by liquid flowability

Simulation and experiment study of the self-excited oscillating mixer with abrasive jet used for the descaling of rusty steel

Thermal energy analysis on liquid desiccant air conditioning system at different desiccant solution parameters

Vibration analysis and control of a screw compressor outlet piping system

Steady-state performance investigation of open-circuit hydrostatic drives used in the rotary head of drill machine

Solution for the torsional vibration of the compressor shaft system with flexible coupling based on a sensitivity study

Analytical solution to orifice design in a rotary valve controlled electro-hydraulic vibration exciter for high-frequency sinusoidal vibration waveform

Analysis of the metal-to-metal contact flange joint subject to external bending moment

Time-varying stiffness model of spur gear considering the effect of surface morphology characteristics

Multi-physics simulation of in situ microwave casting of 7039 Al alloy inside different applicators and cast microstructure

Study on residual stresses caused by underwater friction stir welding: FE modeling and ultrasonic measurement

Optimum waste heat recovery from diesel engines: Thermo-economic assessment of nanofluid-based systems using a robust evolutionary approach

Energy saving analysis of the hydrostatic drives used in the rotary head system of the blast hole drill rig

New approach integrating the health, safety, and environment systems for the maintenance function in industries

Reduction of steady flow torques in a single-stage rotary servo valve

Investigation of the hardness improvement for Al-A380 alloy using the controlled atmosphere in the mechanical stirring casting method

Limiting thermal characteristics for flow of non-Newtonian fluids between asymmetrically heated parallel plates: An analytical study

Simulation analysis and experimental research of a sampling valve for the seafloor natural gas hydrates survey