APPLIED THERMAL ENGINEERING

Thermal conductivity enhancement of form-stable tetradecanol/expanded perlite composite phase change materials by adding Cu powder and carbon fiber for thermal energy storage

Novel method for improving the cooling performance of natural draft wet cooling towers

Energy-saving mechanism and parametric analysis of the high back-pressure heating process in a 300 MW coal-fired combined heat and power unit

Analytical modeling and optimization of phase change thermal management of a Li-ion battery pack

Experimental investigation of the thermal performance of silicon cold plate for battery thermal management system

Novel leaf-like channels for cooling rectangular lithium ion batteries

A numerical method to investigate the temperature behavior of spiral bevel gears under mixed lubrication condition

The effectiveness of night ventilation for the thermal balance of an aquifer thermal energy storage

Longitudinal vortex generator applied to heat transfer enhancement of a flat plate solar water heater

Numerical study on turbulent heat transfer performance of a new parallel-flow shell and tube heat exchanger with sinusoidal wavy tapes using RSM analysis

Numerical investigation of ferrofluid jet flow and convective heat transfer under the influence of magnetic sources

An Experimental Research on Energy Efficiency of a Beverage Cooler with the Latent Heat Storage

New configurations for sea water desalination system using Ranque-Hilsch vortex tubes

Computational fluid dynamic modeling of water desalination using low-energy continuous direct contact membrane distillation process

Review of experimental research on Joule–Thomson cryogenic refrigeration system

Dynamic programming based methodology for the optimization of the sizing and operation of hybrid energy plants

Optimal utilization of geothermal heat from abandoned oil wells for power generation

Performance investigation of an independent dedicated outdoor air system for energy-plus houses

Numerical investigation on the performances of porous matrix with transpiration and film cooling

Effects of low-pressure EGR on gaseous emissions and particle size distribution from a dual-mode dual-fuel (DMDF) concept in a medium-duty engine

The impact of thermal properties on performance of phase change based energy storage systems

Experimental study on heat transfer characteristics of interior walls under partial-space heating mode in hot summer and cold winter zone in China

Parametric analysis on the experimental performance of an ammonia/water absorption cooling system built with plate heat exchangers

Temperature prediction of two phase flow in wellbore using modified heat transfer model: An experimental analysis

The influence of groundwater seepage on the performance of ground source heat pump system with energy pile

Multilevel comparison between magnetite and quartzite as thermocline energy storage materials

Investigation of 3-D multilayer approach in predicting the thermal behavior of 20 Ah Li-ion cells

Numerical analysis of simulant effect on natural convection characteristics in corium pools

A new experimental method to separate interfacial and internal mass transfer on coated adsorbent

Dynamic optimization method of secondary cooling water quantity in continuous casting based on three-dimensional transient nonlinear convective heat transfer equation

Coupled thermal model for geothermal exploitation via recycling of supercritical CO2 in a fracture–wells system

Numerical and experimental study of an improved method for prediction of snow melting and snow sliding from photovoltaic panels

An experimental investigation on flow-rate effects of internal CPOX reforming in SOFCs

A new calculating method of frictional heat and its application during friction stir welding

Performance analysis of a compact heat exchanger with offset strip fin by non-uniform uninterrupted fin length

Numerical and experimental investigation on the condensing heat transfer of R134a outside plain and integral-fin tubes

An improved series-parallel optimization approach for cooling water system

Thermal performance of electrospun core-shell phase change fibrous layers at simulated body conditions

Application of the modified heat transfer formulas for the C-type Heat Exchanger in Passive Heat Removal System of CAP1400

Cyclic durability of calcium carbonate materials for oxide/water thermo-chemical energy storage

A simulation and experimental study on primary cooler for COG heat pump

Research of technical and economic performance of plastic capillary mats used as the heat exchanger of a closed-circuit cooling tower

Numerical investigation of thermo-hydraulic performance of an opposed piston opposed cylinder engine water jacket with helical fins

A feasible process for removal and utilization of CO2 in thermal power plants by MDEA + DMSO scrubbing and Cu/TiO2 photocatalytic reduction

Improvement of two-phase refrigerant distribution for upward flow of a parallel flow minichannel heat exchanger using insertion devices

Cost-effective optimization design of light hydrocarbon recovery process based on exergy analysis

Protective water layer in a plasma mini-reactor revealed by the composition of the exhaust gas