METALS AND MATERIALS INTERNATIONAL

Processing Route Effects on the Mechanical and Corrosion Properties of Dual Phase Steel

Processing and Properties of Biodegradable Magnesium Microtubes for Using as Vascular Stents: A Brief Review

Oxidation of Titanium Matrix Composites Reinforced with (TiB\u2009+\u2009TiC) Particulates

Impact of Non-Reactive Ceria Nanoparticles on the Wettability and Reaction Kinetics Between Lead-Free Sn–58Bi and Cu Pad

Mechanical Properties and Formability of Heat-Treated 7000-Series High-Strength Aluminum Alloy: Experiments and Finite Element Modeling

New MOF-Based Corrosion Inhibitor for Carbon Steel in Acidic Media

Effect of Pre- and Post-weld Heat Treatment on Microstructure and Mechanical Properties of GTD-111 Superalloy Welds

Effect of Initial Grain Size on Friction Stir Weldability for Rolled and Cast CoCrFeMnNi High-Entropy Alloys

Processing of Al/Al2O3 Composite Using Simple Shear Extrusion (SSE) Manufactured by Powder Metallurgy (PM)

Microstructural and Inclusion Characteristics of C–Mn Steel Welds at a Minimal Level of Titanium

Stress Corrosion Cracking of a Copper Pipe in a Heating Water Supply System

Overview of Small Punch Test

Effect of Solidification Mode on Microstructure and Mechanical Properties of AISI420 Steel to SAF2507 Steel Dissimilar Joint Produced by Transient Liquid Phase

Effect of Asymmetric Rolling on the Microstructure, Mechanical Properties and Texture Evolution of Mg–8Li–3Al–1Y Alloy

Application of Different Diffraction Peak Profile Analysis Methods to Study the Structure Evolution of Cold-Rolled Hexagonal α-Titanium

Study on the Weldability and Mechanical Characteristics of Dissimilar Materials (Al5052-DP590) by TIG Assisted Hybrid Friction Stir Welding

Research on the Microstructure Characteristic and Tensile Property of Laser-MIG Hybrid Welded Joint for 5A06 Aluminum Alloy

Measurement and Theoretical Calculation Confirm the Improvement of T7651 Aging State Influenced Precipitation Characteristics on Fatigue Crack Propagation Resistance in an Al–Zn–Mg–Cu Alloy

Investigation on Microstructure, Hardness and Wear Resistance of Electron Beam Wire-Feeding Deposited Inconel 718 Alloy Coatings

Formation of Metastable Aluminides in Al–Sc–Ti (Zr, Hf) Cast Alloys

New Eutectic High-Entropy Alloys Based on Co–Cr–Fe–Mo–Ni–Al: Design, Characterization and Mechanical Properties

Deformation, Cracking and Fracture Behavior of Dynamically-Formed Oxide Layers on Molten Metals

Microstructure and Mechanical Property Improvement of Dissimilar Metal Joints for TC4 Ti Alloy to 304 Stainless Steel Using TA2/Q235 Composite Interlayer

Compressive Deformation Behavior of AZ31Mg Alloy Containing {10–12} Extension Twins at Different Temperature

Improved Mg–Al–Zn Magnesium Alloys Produced by High Energy Milling and Hot Sintering

Wear Behavior of P/M High Nb Containing γ-TiAl Alloy in Different Environments

Numerical Analysis of Radio-Frequency Inductively Coupled Plasma Spheroidization of Titanium Metal Powder Under Single Particle and Dense Loading Conditions

Stacked Auto-Encoder Network to Predict Tensile Deformation Behavior of a Typical Nickel-Based Superalloy Considering Portevin–Le Chatelier Effects

Effects of Cryogenic Deformation on Second-Phase Al2Cu Particles and Mechanical Properties of 2219 Al–Cu Alloy Rings

Hot Deformation Characteristics and Processing Map Analysis of Pre-Forged AZ80 Magnesium Alloy

Warpage of Powder Injection Molded Copper Structure

Compressive Properties of Electron Beam Melted Ti–6Al–4V Porous Meshes with Different Struts Distributions

Densification and Magnetic Properties of Injection Molded Gas- and Water-Atomized Fe–Si Alloys and Effect of Fe-10.2 wt% P Addition

Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Effects of the Surface Contact on the Uncertainty in Indentation Yield Strength: Surface Roughness and Angular Misalignment

Effect of Cu Contents on Nanocluster Formation and Two-Step Aging Behavior in Al–Mg–Si Alloys

Extraction, Distribution, and Precipitation Mechanism of TiN–MnS Complex Inclusions in Al-Killed Titanium Alloyed Interstitial Free Steel

Anelastic and Microplastic Damping of an Mg–Zn–Y–Al Alloy

27R-SiAlON Reinforced AlN Composite: Synthesis, Sintering and Characterization

Phase Stability and Thermo-Physical Properties of Nickel-Aluminum Binary Chemically Disordered Systems via First-Principles Study

Estimation of Reducibility of Sinter with Continuous Measurement of Reduction Degradation Test

Comparison of the Crystallization Behavior of Silica Between Mg- and Al-Phosphate Used in Tension Coatings of Grain-Oriented Electrical Steel

Effects of β Air Cooling and Subsequent Cold Rolling on Microstructure and Hardness of Zr702 Sheet

Pore characteristics of Lotus-Type Porous Copper Fabricated by Centrifugal Casting

Characterization and Formation Mechanism of Ni3Si–Al2O3 Nanocomposite Prepared by Mechanochemical Reduction Method

Effect of Synthesis Mode and Ni Particle Size on Microstructural Aspects and Hardness Properties of Combustion-Synthesized NiTi

Morphology Evolution of Mn5Si3 Phase and Effect of Mn content on Wear Resistance of Special Brass