Journal of Material Cycles and Waste Management

Assessment of energy parameters of biomass and biochars, leachability of heavy metals and phytotoxicity of their ashes

The use of waste diversion indices on the analysis of Canadian waste management models

Barriers on the propagation of household solid waste recycling practices in developing countries: State of Palestine example

An assessment of side-stream generation from Finnish forest industry

Kinetics study of the methane production from experimental recycled pulp and paper sludge by CSTR technology

Waste walnut shell as an alternative bio-based filler for the EPDM: mechanical, thermal, and kinetic studies

Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties

Reusing the generated sludge as Fe source in Fenton process for treating crepe rubber wastewater

Can waste foundry sand fully replace structural concrete sand?

Agricultural wastes preparation, management, and applications in civil engineering: a review

Remediation of multi-metal contaminated soil using biochars from rice husk and maple leaves

LCA evaluation of packaging re-use: the steel drums case study

Properties and potential use of biochars from residues of two rice varieties, Japanese Koshihikari and Vietnamese IR50404

Cycles and sinks: two key elements of a circular economy

Variations in generation of vegetable, fruit and flower market waste and effects on biogas production, exergy and energy contents

Comparison of biodiesel yield of three processes using sewage sludge as feedstock and byproduct characteristics by in situ transesterification

A study on recovery of alumina grains from spent vitrified grinding wheel

Use of copper mine tailing in concrete: strength characteristics and durability performance

Potential use of waste cockle shell as filler for thermoplastic composite

Virtuous cycle of destruction and total recycling of pure asbestos and asbestos-containing waste

Generation rates and current management of municipal, construction and demolition wastes in Tehran

Study of improvement of bioremediation performance for the degradation of petroleum hydrocarbons in oily sludge by a chemical pretreatment strategy

Increasing seawater alkalinity using fly ash to restore the pH and the effect of temperature on seawater flue gas desulfurization

Effect of substituting organic fraction of municipal solid waste with fruit and vegetable wastes on anaerobic digestion

Metal valorization from the waste produced in the manufacturing of Co/Mo catalysts: leaching and selective precipitation

A study on selective leaching of heavy metals vs. iron from fly ash

Utilization of metalized plastic waste of food packaging articles in geopolymer concrete

Removal of Mn and Cd contained in mine wastewater by Mg–Al-layered double hydroxides

Quantitative phase analysis of fly ash of municipal solid waste by X-ray powder diffractometry/Rietveld refinement

Anaerobic co-digestion of tannery wastes using two stage anaerobic sequencing batch reactor: focus on process performance of hydrolytic–acidogenic step

Current status and behavior modeling on household solid-waste separation: a case study in Da Nang city, Vietnam

Production of methane-rich biogas and minimization of sludge by adopting ethanol fermentation for the pretreatment of biomethanation

A promising strategy for the utilization of waste nitrile gloves: cost-effective adsorbent synthesis

Agricultural bio-waste for adsorptive removal of crude oil in aqueous solution

Mobile application in municipal waste tracking: a pilot study of “PAC waste tracker” in Bangalore city, India

Real-time identification of plastics by types using laser-induced breakdown spectroscopy

Eco-friendly polymers mortar for floor covering based on dredged sediments of the north of France

Extraction of rare earths by undiluted [P666,14][NO3] and DEHEHP, and the recovery of rare earths from lamp phosphors

Novel method for sustainable and selective separation of PVC and PET by the homogeneous dissociation of H2O2 using ultrasonication

Characterization of anaerobic digestion of Chinese cabbage waste by a thermophilic microorganism community

Use of waste sludge generated from water defluoridation plant as partial substitute for fine aggregates in mortars: microstructural characterization and compressive strength

Economic assessment of food waste co-digestion with sewage sludge in five Asian cities

N-doped carbon microspheres anode from expired vitamin B1 injections for lithium ion battery

Multi-sector evaluation of generation, composition and sustainable treatment systems for commercial waste streams in India

Thermo-chemical conversion of waste glass into non-vitreous porous material for adsorption application

Immobilization of heavy metal using dithiocarbamate agent

Preparation of LTA, HS and FAU/EMT intergrowth zeolites from aluminum scraps and industrial metasilicate