ANNALES DE CHIMIE-SCIENCE DES MATERIAUX

Experimental Study on Strength Parameters of Self Repairing Concrete

Empirical Relationships on Mechanical Properties of Class-F Fly Ash and GGBS Based Geopolymer Concrete

Evaluation of Mechanical Parameters of Bacterial Concrete

Activity of Bimetallic Gold-Iron Catalysts in Adipic Acid Production by Direct Oxidation of Cyclohexene with Molecular Oxygen

Structural Changes Undergone During Thermal Aging and/or Processing of Unstabilized, Dry-blend and Rigid PVC, Investigated by FTIR-ATR and Curve Fitting

Artificial Aggregate Lightweight Structural

Effect of Ultrafine Ground Granulated Blast-Furnace Slag (UFGGBFS) and Copper Slag on Ambient Cured Geopolymer Concrete

Numerical Study of the Solidification of Phase Change Materials in a Rectangular Cavity: Effects of Convection and Aspect Ratio

Prediction of Bolted Joint Dynamics Based on the Thin-Layer Element of Nonlinear Material

Mechanical Properties of Plant Fibers Reinforced Alkali-Activated Slag Cementitious Material at High Temperature

Improving the Performance of Solar Air Heater Using High Thermal Storage Materials

Investigation of Microstructure and Mechanical Properties of MIG Welded Mild Steel Plates

Effect of Temperature on Fracture Parameters of Aluminum Alloy Al 6061: A Numerical Study

Influence of Magnetic Water on Self-compacting Concrete Using Sulphate Resisting Cement

Boriding Kinetics of FeB and Fe2B Layers on AISI M2 Steel by the Integral Diffusion Model

Dissipated Strain Energy of Aluminum Alloy 6061-T6 Induced by Low Cycle Fatigue

Investigation on Mechanical Properties of Lightweight Concrete Partially Replacing Sawdust to Fine Aggregate

Preparation of Mine Filling Material from Steel Slag Mud

Probabilistic Analysis for Estimating the Hydrogen Desorption Time from Steel Wire Rods Using Monte Carlo Simulation

Solidification of Heavy Metals in Waste Incineration Fly Ashes with Silica-Alumina Composite

Impacts of Different Parameters on Spray Cooling of Copper Alloy B14

Combined Treatment of Coking Wastewater with N-Ce-TiO2 and Modified Inferior Coal Char

Analysis of Springback Behavior in Steel and Aluminum Sheets Using FEM

Certain Aspects of Particle Distribution in Castings Formed in Rotating Moulds

Influence of Foaming Agent on Technical Performance of Ceramsite Aerated Concrete Blocks

Numerical Study of the Surface Roughness, Thermal Conductivity of the Contact Materials and Interstitial Fluid Convection Coefficient Effect on the Thermal Contact Conductance

Broad-spectrum Tuning of Surface Plasmon Resonance Using Palladium Nanorods

Electrochemical Study of MoTaNbVTi High Entropy Alloy in Aqueous Environments

Experimental Analysis on Flexural-tensile Performance of Polyester Fiber Asphalt Concrete

Preparation and Performance Analysis of Foam-concrete Sound Absorbing Material Prepared Purely from Solid Wastes

Influence of Plastic Deformation of Copper on the Behavior of Electromagnetic Shielding

Impact of Blast Design Parameters on Blasted Muckpile Profile in Building Stone Quarries

Effect of Additional Fiberglass Fiber on Concrete Performance

Design of Diamond Drill Bits with Primary and Secondary Abrasives

Tensile Properties of Remolded Loess and Undisturbed Loess

Thermal Performance Analysis of Exterior Wall Materials of Huizhou Residential Buildings Adapted to Local Climate

Recycling of Used Hydrogenated Nitrile Butadiene Rubber Through Powder Modification by Trans-Polyoctylene Rubber

Microstructure and Mechanical Properties of Al 6061/Al2O3/Fly-Ash Composite Fabricated Through Stir Casting

Formation and Dissolution of Carbides and Nitrides in the Weld Seam of X70 Steel by the Effects of Heat Treatments

Utilization of Waste Saw Dust from Wood Industry in Development of Glass Fiber Epoxy Resin Hybrid Green Composite Material

Impacts of Element Diffusion on Bond Breakage of Cemented Carbide Cutter

A Numerical Method Approach for Analyzing the Effects of Joint Orientation on Stability of Open-stope in Metalliferous Mines

Electroreduction of p-Nitrophenol by Surfactant Modified Electrodes

Experimental Analysis on Ductility of Polyvinyl Alcohol Fibre Reinforced Concrete Frame Joints

Effects of Replacing Fly Ash with Cutting Mud on the Performance of Ceramsite Aerated Concrete

Hydrogen Embrittlement of 316L Stainless Steels Exposed in 1.0M Hydrochloric Acid Solution