STRENGTH OF MATERIALS

Ductile-to-Brittle Transition and Impact Fracture Behavior of 3Mn–Si–Ni Low Carbon Martensitic Steel

Fatigue Life Prediction by a Local Stress-Strain Criterion for Hole-Containing Specimens After Precompression of Their Material

Physical Simulation-Based Characterization of HAZ Properties in Steels. Part 1. High-Strength Steels and Their Hardness Profiling

Optimization of Residual Stresses in Laser-Mixed WC(Co, Ni) Coatings

Centrifuge Simulation of the Thermal Response of a Dry Sand-Embedded Diaphragm Wall

A Setup for Complex Investigation of Mechanical Characteristics of Structural Materials for NPP Equipment

Structural Optimization of Waffle Shell Sections in Launch Vehicles

Influence of Axial Force on Tensile Strength and Microstructural Characteristics of Friction Stir Buttwelded Aluminum Alloy/Steel Joints

Fracture Behavior of Single-Crystal Alloys Under Thermocyclic Loading

Development of Graphene Nanoplatelets-Reinforced Thermo-Responsive Shape Memory Nanocomposites for High Recovery Force Applications

Stress-Strain and form Accuracy of Carbon Steel Components Produced by a Multi-Point Stretch Forming Technique

Solution to the Task of Elastic Axial Compression–Tension of the Composite Multilayered Cylindrical Beam

A Study of the Stress State of Underground Gas Pipelines in Mine Working Zones Using the Method of Internal Response Function

Fatigue Strength and Life Prediction of a MAR-M247 Nickel-Base Superalloy Gas Turbine Blade with Multiple Carbide Inclusions

Effects of Undercooling and Transformation Time on Microstructure and Strength of Fe–C–Mn–Si Superbainitic Steel

Density Effect of PTFE-Copper Powder Metallurgy Liner Material on the Perforation Performance of Shaped Charge Jets

A Novel Inclined Excitation Method for Crack Detection of Non-Ferromagnetic Materials Using Eddy Current Thermography

Longitudinal Fracture Analysis of Nonlinear Elastic Circular Shafts Loaded in Torsion

Effect of Heat Treatment on the Microstructure and Strength of Stainless Steel-Clad Plate

Statistical Characteristics of Microplastic Strains of the Surface Layer of Austenitic Steel Under Monotonic and High-Cycle Loadings

Fatigue Life Prediction of the Gear Box in Tracked Vehicles Based on Running Simulation Tests

Influence of H2S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel

Effect of Hydraulic Liquid and Sea Water on the Mechanical Characteristics of Polymeric Fibrous Structures

Shear Fracture Model of Ultrasonic Cutting for an Aramid Paper Honeycomb

Effect of Drilling-Induced Delamination on Buckling Behavior of Open Hole Composite Laminate Specimens Under Compressive Loading

Effect of Boundary Form Disturbances on the Frequency Response of Planar Vibrations of Piezoceramic Plates. Experimental Investigation

Assessment of Cold Extrusion Effect on Stress–Strain Curves of Pure Copper Arc Parts Based on the Cosine Velocity Model

Rebar Corrosion Rate Estimation of Reinforced Concrete Components Exposed to Marine Environment

Stress-Strain State and Damage in Polymer Parts of Instruments Aboard Artificial Satellites

Calculation-and-Experimental Investigation on Natural Frequencies and Oscillation Modes of Pairwise-Shrouded Cooled Turbine Blades

Tensile Fracture Behavior of Carbon Fiber/Al Composites Produced by the Liquid Extrusion Infiltration Technique

Microstructure Variation of Ultrasuper Critical 11Cr Ferritic Steel Under Long-Term Thermal Ageing and Creep

Effect of Sampling Interval and Anisotropy on Laser Scanning Accuracy in Rock Material Surface Roughness Measurements

Calculation of the γ-TiAl Lattice Resistance

Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment

Residual Stresses in Ultrasonic-Assisted Laser Sintered Grinding Diamond Materials

Effect of Shock and Vibration Preloading on the Deformation and Fracture Behavior of 17G1S-U Steel

Stress Corrosion of Bridge Cable Wire by the Response Surface Method

Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites

Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel

Effect of Pin Diameters on the Wear Characteristics of Friction Pairs

Effect of Zn on the Mechanical Properties and Microstructure of as-Cast and Solution-Treated Mg–6Y–2Nd–1Gd–0.5Zr Alloys

Residual Stress Effect on the Strength Estimate of Base-Coating Systems

Physical Simulation-Based Characterization of HAZ Properties in Steels. Part 2. Dual-Phase Steels

Creep of Textile-Reinforced Composite Under Static and Cyclic Loads

Microstructure-Based Model for Sharp Stress Raiser-Related Fatigue Stage Length Assessment

Statistical Inference of Constant-Stress Partially Accelerated Life Test Model Using Failure-Censored Data from the Linear Failure Rate Distribution