Journal of Bio- and Tribo-Corrosion

Some New Nonionic Surfactants Based on Propane Tricarboxylic Acid as Corrosion Inhibitors for Low Carbon Steel in Hydrochloric Acid Solutions

Evaluation of Mechanical Properties and Corrosion Protection Performance of Surface Modified Nano-alumina Encapsulated Epoxy Coated Mild Steel

Microstructure and Corrosion Characteristics of In Situ Aluminum Diboride Metal Matrix Composites

Effect of Corrosion on Crude Oil and Natural Gas Pipeline with Emphasis on Prevention by Ecofriendly Corrosion Inhibitors: A Comprehensive Review

Electrochemical Behavior of Composite Nanoparticles on the Corrosion of Mild Steel in Different Media

Inhibitive Performance of Ibuprofen Drug on Mild Steel in 0.5 M of H2SO4 Acid

Extraction, Characterization and Anticorrosion Potential of an Essential Oil from Orange Zest as Eco-friendly Inhibitor for Mild Steel in Acidic Solution

Pitting Corrosion Behavior of F304 Stainless Steel Under the Exposure of Ferric Chloride Solution

Critical Overview of Coatings Technology for Metal Matrix Composites

Dry Sliding Wear Mechanism Maps of Al–7Si–0.3Mg Hybrid Composite: Novel Approach of Agro-Industrial Waste Particles to Reduce Cost of Material

Experimental and Theoretical Studies for Tobacco Leaf Extract as an Eco-friendly Inhibitor for Steel in Saline Water

A Comparative Study on Inhibitory Actions of TCE, GIE, and CSE on the Corrosion of 6063 Al Alloy in H3PO4 Medium

Latest Exploration on Natural Corrosion Inhibitors for Industrial Important Metals in Hostile Fluid Environments: A Comprehensive Overview

Inhibition of Carbon Steel Corrosion in HCl and H2SO4 Solutions by Ethyl 2-Cyano-2-(1,3-dithian-2-ylidene) Acetate

Investigation of Mechanical and Tribological Properties of Red Mud-Reinforced Particulate Polymer Composite

Synthesis, Characterization, and Anti-corrosion Behavior of Novel Mono Azo Dyes Derived from 4,5,6,7-Tetrahydro-1,3-benzothiazole for Mild Steel in Acid Solution

Experimental Investigations on Tribological Characteristics of Ti–6Al–4V Under Wet Conditions

Tribological Behavior of Multi-walled Carbon Nanotubes Grafted Carbon Fiber-reinforced Friction Material

Tribocorrosion Behaviour of Ti–6Al–4V Alloy in Biomedical Implants: Effects of Applied Load and Surface Roughness on Material Degradation

Investigations on Machining and Wear Characteristics of Al 7075/Nano-SiC Composites with WEDM

Temperature Effect, Activation Energies and Adsorption Studies of Waste Material as Stainless Steel Corrosion Inhibitor in Sulphuric Acid 0.5 M

Retraction Note to: Review on Tribological Performance of Natural Fibre-Reinforced Polymer Composites

Mathematical Modeling and Electrochemical Behavior for Corrosion Inhibition of Steel by Kiwi Juice Extract

Engineered Synthetic Diamond Film as a Protective Layer for Tribological and Machining Applications: A Review

Comparative Assessment of the Pitting Corrosion Resistance and Passivation Behaviour of 439L Ferritic and 904L Austenitic Stainless Steels for Application in Extreme Process Environments

Analyzing Process Parameters for Finishing of Small Holes Using Magnetically Assisted Abrasive Flow Machining Process

Cathodic Protection Performance Evaluation of Magnesium Anodes on Mild Steel Corrosion in 0.5 M H2SO4 and Seawater Environments

Tribocorrosion Performance of Tool Steel for Rock Drilling Process

Corrosion Behavior of Mild Steel in Different Concentrations of Ethanol Beverages

Corrosion of Crude Oil Distillation Column: Kinetics and Mathematical Views

In Vitro Microstructure, Mechanical Properties and Corrosion Behaviour of Low, Medium and High Carbon Steel Under Different Heat Treatments

Corrosion Resistance of Aluminium–Silicon Hypereutectic Alloy from Scrap Metal

Synthesis, Characterization and Inhibition Performance of Schiff Bases for Aluminium Corrosion in 1 M H2SO4 Solution

Performance Evaluation of Lubricants Used in Gearbox of CNC Bending Machine

The Effect of Corsican Poplar Leaf Buds (Populus nigra var. italica) Essential Oil on the Tribocorrosion Behavior of 304L Stainless Steel in the Sulfuric Medium

Optimization and Analysis of Wear Rate of CFRP-NanoZno/Nanoclay Hybrid Composites Using RSM

Wear Behavior of Spheroidal Graphite Cast Iron in Biodiesel Blends

Investigation on the Functionally Graded Properties of Zn–6MgO–12MnO2 Composite Coating Fabricated by Dual Anode Electrolytic Deposition Technique

Thermodynamic and Electrochemical Analysis of Synergistic Corrosion Inhibition Performance of Natural Polysaccharides with Metal Halides on Mild Steel in Hydrochloric Acid Solution

Characterization of 2017A Anodized Aluminum Alloy by Infrared Thermographic Techniques and SEM Observations During Tensile Testing

Corrosion Behavior Evaluation in Simulated Body Fluid of a Modified Ti–6Al–4V Alloy by DC Glow Plasma Nitriding

Mechanical and Corrosion Behaviour of DLC and TiN Coatings Deposited on Martensitic Stainless Steel

Experimental Characterization of Surface Roughness Using Magnetorheological Abrasive Flow Finishing Process on AISI D3 Steel

Prospects of DNA Macromolecule for Corrosion Inhibitor Applications: A Mini Review

The Electrochemical and Biological Behaviour of Biomedical Alloy by Surface Modification Technique through E-Beam Evaporation

Electrochemical and Cell Response of Surface Modified Ti6Al4V for Biomedical Applications

Sugarcane Wastes as a Green Additive to Control Corrosion of Steel-Reinforced Concrete Under Different Treatment Conditions