Construction and Building Materials

A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission

Performance of hot and warm mix asphalt mixtures enhanced by nano-sized graphene oxide

Effect of characteristics of chemical combined of graphene oxide-nanosilica nanocomposite fillers on properties of cement-based materials

Effect of steel fiber and carbon black on the self-sensing ability of concrete cracks under bending

Rheological behaviour of cement paste added with natural fibres

Experimental research on transition from scale 3D printing to full-size printing in construction

Early age tensile creep of high performance concrete containing mineral admixtures: Experiments and modeling

Re-examining the suitability of high magnesium nickel slag as precursors for alkali-activated materials

Modeling on the hydration and leaching of eco-friendly magnesium oxychloride cement paste at the micro-scale

Mesostructured property of aggregate disruption in asphalt mixture based on digital image processing method

Prediction of compressive and tensile strengths of zeolite-cemented sand using porosity and composition

Effect of cleaned corrosion surface topography on mechanical properties of cold-formed thin-walled steel

Experimental study on the resistance of basalt fibre-reinforced concrete to chloride penetration

The use of high content of fine crumb rubber in asphalt mixes using dry process

The performance of asphalt mixtures modified with lignin fiber and glass fiber: A review

Critical region method-based fatigue life prediction of notched steel wires of long-span bridges

Investigation of C-S-H in ternary cement pastes containing nanosilica and highly-reactive supplementary cementitious materials (SCMs): Microstructure and strength

Comparing the effects of nano-silica and hydrated lime on the properties of asphalt concrete

Maturity model for fracture properties of concrete considering coupling effect of curing temperature and humidity

Dispersion of triethanolamine-functionalized graphene oxide (TEA-GO) in pore solution and its influence on hydration, mechanical behavior of cement composite

Enhanced seawater corrosion resistance of reinforcement in nanophase modified fly ash concrete

Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water

Basalt fibre-reinforced mortar: Rheology modelling based on water film thickness and fibre content

Reference-free determination of debonding length in reinforced concrete beams using guided wave propagation

Experimental characterisation of fatigue damage in foamed bitumen stabilised materials using dissipated energy approach

Deformation behaviour of concrete materials under the sulfate attack

A study on the performance of damaged RC members repaired using ultra-fine slag based geopolymer mortar

The effect of different types of fiber on flexure strength and fracture toughness in SIFCON

Mix design and mechanical characterization of self-compacting cement-bound mixtures for paving applications

Trees as large-scale natural metamaterials for low-frequency vibration reduction

Repair of subsurface micro-cracks in rock using resin pre-coating technique

3D reconstruction of moisture damage resulted volumetric changes in porous asphalt mixture

Do polymer fibres affect the distribution of steel fibres in hybrid fibre reinforced concretes

Effect of temperature gradient on transient thermal creep of heated and stressed concrete in transient state tests

Comparison of different blending combinations of virgin and RAP-extracted binder: Rheological simulations and statistical analysis

Assessment of different methods for characterization and simulation of post-cracking behavior of self-compacting steel fiber reinforced concrete

Age dependence of cracking and deformability of a strain-hardening cement-based composite

Evaluation of experimental testing methods for the design of permeable friction course mixtures

Experimental verification of shear analogy approach to predict bending stiffness for softwood and hardwood cross-laminated timber panels

Tensile strength of plain concrete under sustained load by PT machine

Bamboo joints with steel clamps capable of transmitting moment

Effects of flow rates and layer thicknesses for aggregate conveying process on the prediction accuracy of aggregate gradation by image segmentation based on machine vision

Rail neutral temperature monitoring using non-contact photoluminescence Piezospectroscopy: A field study at high-speed rail track

Study on seismic behavior and design method of dissipative bolted joint for steel frame with replaceable low yield point steel connected components

A novel method for measuring surface free energy of highly wettable mineral powders

Mineralogical and mechanical characterization of rammed earth external renderings of the south of Portugal

Electrochemical and microstructural study on depassivation of ductile iron surface in chloride-contained simulated cement-mortar pore solution