CHEMICAL ENGINEERING RESEARCH & DESIGN

Enhanced performance of polyvinylidene fluoride ultrafiltration membranes by incorporating TiO2/graphene oxide

Process analysis and optimization of single stage flexible fibre biofilm reactor treating milk processing industrial wastewater using response surface methodology (RSM)

Optimisation of a downstream oil supply chain with new pipeline route planning

Improved nonlinear process monitoring based on ensemble KPCA with local structure analysis

An Experimental Study of CO2 Gasification Kinetics during Activation of a Spent Tyre Pyrolysis Char

An overview on control strategies for CO2 capture using absorption/stripping system

Modeling and simulation of cooling water systems subjected to fouling

Techno-economic comparison of reverse water gas shift reaction to steam and dry methane reforming reactions for syngas production

CO2 capture and adsorption kinetic study of amine-modified MIL-101 (Cr)

Mixing of highly concentrated slurries of large particles: Applications of electrical resistance tomography (ERT) and response surface methodology (RSM)

An investigation of the detection of acoustic sand signals from the flow of solid particles in pipelines

Castor oil biorefinery: Conceptual process design, simulation and economic analysis

Enhanced elemental mercury removal by facile sulfurization of agrowaste chars

Homemade 3-D printed flow reactors for heterogeneous catalysis

An integrated MILP method for gathering pipeline networks considering hydraulic characteristics

RANS-based predictions of dense solid–liquid suspensions in turbulent stirred tanks

Transparent polymers to emulate the rheological properties of primary, activated, and digested sludge

CFD simulation for up flow jet-loop reactors by use of bi-dispersed bubble model

Improving cyclone efficiency for small particles

Hydrodynamic and electrostatic interactions of water droplet pairs in oil and electrocoalescence

Parameter optimization of gas–solid heat transfer process in sinter packed bed based on further exergy analysis

Enhanced separation of maximum boiling azeotropic mixtures with extractive heterogeneous-azeotropic distillation

Preparation of amino functionalized titanium oxide nanotubes and their incorporation within Pebax/PEG blended matrix for CO2/CH4 separation

Experimental study on a swirl-vane separator for gas–liquid separation

A new simplified tray efficiency model with improved accuracy for sieve trays

Characterization of a centrifugal partition chromatographic column with spherical cell design

Analysis of entrained liquid by use of optical measurement technology

Detailed geometrical analysis of statistical activity variations in diluted catalyst beds

Transitional phase modeling and monitoring with respect to the effect of its neighboring phases

Pulp mineralogy and chemistry, leaching and rheological behaviour relationships of refractory gold ore dispersions

Drill cuttings transport and deposition in complex annular geometries of deviated oil and gas wells: A multiphase flow analysis of positional variability

In situ modification of polyamide reverse osmosis membrane module for improved fouling resistance

Numerical investigation of a single feedback loop oscillator with two outlet channels

Nitric oxide removal from flue gas using dielectric barrier discharge coupled with negative pulse corona

Aggregation in mixing tanks - the role of inter-particle forces

The use of first principles model for evaluation of adaptive soft sensor for multicomponent distillation unit

Numerical modeling for characterization of CO2 bubble formation through submerged orifice in ionic liquids

Mass transfer modeling and industrial validation for sodium aerosols removal in a designed turbulent contact absorber

Artificial neural network modeling on the prediction of mass transfer coefficient for ozone absorption in RPB

Realistic interplays between data science and chemical engineering in the first quarter of the 21st century: Facts and a vision

Liquid–liquid flow patterns and slug characteristics in cross-shaped square microchannel for cryogel beads preparation

Effect of residence time and energy dissipation on drop size distribution for the dispersion of oil in water using KMS and SMX+ static mixer

A Framework for the Experimental Characterisation of Novel Solvents in a Pilot-plant Scale CO2 Capture Process under Industrial Conditions Using a Data-driven Modelling Approach

Investigation of the impact of synthesized hydrophobic magnetite nanoparticles on mass transfer and hydrodynamics of stagnant and stirred liquid–liquid extraction systems

Effect of interparticle force on gas dynamics in a bubbling gas–solid fluidized bed: A CFD-DEM study

Diffusion–reaction phenomenon for negative-order reactions in flow reactors

Heat transfer coefficient in internal mixers for different polymers and processing conditions