CANADIAN JOURNAL OF CIVIL ENGINEERING

Indoor climate loads for dwellings in different cold climates to assess hygrothermal performance of building envelopes1

An experimental study on cyclic behaviour of RC connections using waste materials as cement partial replacement.

Dynamic Characteristics of Light-Frame Wood Buildings

Testing evolutionary algorithms for optimization of water distribution networks

Performance Prediction of Construction Projects using Soft Computing Methods

A new analytical model for dip modified velocity distribution in fully developed turbulent open channel flow

A Geostatistical Approach to Winter Road Surface Condition Estimation using Mobile RWIS Data

Toronto-York Spadina subway extension tunnelling under Schulich Building

Generic algorithm to assess moisture susceptibility of simplified wall assemblies

Lane-based short-term urban traffic parameters forecasting using multivariate artificial neural network and locally weighted regression models: A genetic approach1

Theoretical study on pipe friction parameter identification in water distribution systems

A service life model of metal ties embedded in the mortar joints of brick veneer walls with applications to reinforced concrete

A framework for total productivity measurement of industrial construction projects

An evolutionary stochastic discrete time-cost trade-off method

BEHAVIOR OF A HOT-MIX ASPHALT MADE WITH RECYCLED CONCRETE AGGREGATE AND CRUMB RUBBER

Thermal and mechanical properties of PCM-incorporated normal and lightweight concretes containing silica fume

Integrated predictive artificial neural network fatigue endurance limit model for asphalt concrete pavements

Impact of frontal round jet on vortex synchronization control around a cylinder: a turbulence perspective

Modeling bicyclist injury severity in bicycle–motor vehicle crashes that occurred in urban and rural areas: a mixed logit analysis

Evaluation of CSA S16-14 asymmetry parameter for singly-symmetric beams

Passing lane optimum length on two-lane highways

Pressure flow and weir scour beneath a bridge deck

Shear deformable super-convergent finite element for steel beams strengthened with glass-fiber reinforced polymer (GFRP) plate

Use of hygrothermal modeling to validate the application of an open-cell spray-foam insulation application to a high-rise heritage building in Winnipeg, Manitoba1

Effect of Discharge and Upstream Jam Angle on the Flow Distribution beneath a Simulated Ice Jam

Investigation on high-temperature performance of waste-based high-viscosity asphalt binders (WHABs) by Repeated Creep Recovery (RCR) test

Development of a clustering-based model for enhancing acoustic leak detection

Implications of climatic variations in temporal precipitation patterns for the development of design storms in Newfoundland and Labrador

A streamlined energy efficiency performance indicator for water distribution systems: a case study

Analysis of safety of slender concrete masonry walls in relation to CSA S304-14

Effect of flotation tires used for agricultural field equipments on flexible pavement damage

Influence of latent attitudinal factors on the multimodality of post-secondary students in Toronto

Simulations of bubbly two-phase flow in hydraulic jumps of relatively high Reynolds number

Financial issues in construction companies: bibliometric analysis and trends

Parametric study of medium span bridges retrofitted with RC jacketing

Evaluation of the structural capacity of rigid pavements at the network level

Effect of edge distance on shear friction capacity of steel plates anchored with reinforcing bars in comparison with headed bolts

Numerical prediction of ice-jam profiles in lower Athabasca River

Protected–permissive left turn phasing with flashing yellow arrow signal: study of red intervals for an effective phase transition

Analysis of rectangular hollow section trusses

Quality of floating car data (FCD) as a surrogate measure for urban arterial speed

A laboratory method for the visualization and quantification of hyporheic flow paths and velocities

Performance evaluation of jointed plain concrete pavements with sealed and unsealed joints in North Texas

Effects of jet-breaker dimensional characteristics on drop manhole hydraulic performance

Integration of optimization methodology to evaluate pavement maintenance strategies for deteriorated low-volume roads

A framework to assess the costs and benefits of advanced work packaging in industrial construction

Withdrawal resistance of structural self-tapping screws parallel-to-grain in common Canadian timber species