HTM-Journal of Heat Treatment and Materials

Development of an Interactive Batch Planning System for Plasma Nitriding Furnaces*

Simulation-Aided Process Chain Design for the Manufacturing of Hybrid Shafts

Manganese Alloyed Q & T Steel with high Hardenability for Forging Parts with large Diameters

Getting to Know your Own Induction Furnace: Basic Principles to Guarantee Meaningful Simulations∗

Influence of the Parameters of Induction Heat Treatment on the Mechanical Properties of 50CrMo4*

A Screening Approach for Rapid Qualitative Evaluation of Residual-Stress States – Application to Laser-Hardened Microalloyed Steel

Internal Quenching: Ideal Heat Treatment for Difficult to Access Component Sections∗

Investigation of the Influence of Proximal Radiation on the Thermal Stresses and Lifetime of Metallic Radiant Tubes in Radiation-Dominated Industrial Furnaces*

Adjustment of Lifetime-Increasing Surface Layer States by Complementary Machining∗

Development of an Aluminium-Reduced Niobium-Microalloyed Case Hardening Steel for Heavy Gear Manufacturing

Solubility of Carbon and Nitrogen and Precipitation of Carbides and Nitrides during Carbonitriding as Basis for Simulation∗

New Steel Grades for Deep Carburizing of Windmill Transmission Components*

Comparative Studies on Electron Beam and Laser Beam Welding of QT-Steel and Structural Steel

Alloy Systems for Heat Treated Sintered Steels∗

In-situ Characterization by Eddy Current Testing of Graded Microstructural Evolution in the Core and Peripheral Zone during Material Conversion during Case Hardening*

Simulation of the Austenitization of Ferrite-Carbide Microstructures by means of the Cellular-Automaton Method (CA)∗

Surface Layer Microstructure of Carburised and Bainitically Transformed Parts and their Mechanical Properties∗

Influence of Pressure on Vacuum Oil Quenching∗

Modelling of Hardenability and Tempering of High-Strength Structural Steels

Deep Cryogenic Treatment and Nitriding of 42CrMo4 Steel*

Can Carbides resist Nitriding?*

Influence of Porosity in LBM Layers on the Quality of Laser Deep Alloying

Nitriding of Rolling Contact Races

Fine Grain Resistance of Steel 20NiMoCr6-5+Nb (Material No. 1.6757) during Case Hardening depending on Cold Massive Forming∗

Mechanisms and Process Control for Quenching with Aqueous Polymer Solutions∗

Analysis of the Chemical and Tribological Properties of Phosphate Glass Layers Developing during Metalworking Processes on Manual Transmission Synchronizers*

Impact of the Spheroidization Annealing on the Intensification or Mitigation of the Initial Pearlite Banding Degree Presented in Wire Rolled State